COBY electronic CX-266 - Manual (Page 15)

15
AUXILIARY (AUX) MODE
Select AUX mode to listen to external audio devices connected through the 3.5mm Auxil-
iary Stereo Line-In jack. Press FUNCTION to select AUX mode.
Use a 3.5mm Male-to-Male Stereo cable to connect any external audio device with a
3.5mm Headphone or Line-Out jack to the AUX IN jack on the rear panel of the stereo.
Start playback on the external audio device. Adjust the volume on the audio device (do not
set the volume too high to avoid distortion). You may also adjust the volume on the CX-266.
To control playback function, use the controls provided by the external audio device.
1.
2.
3.