Cingular Amzer Smart Keyboard - Manual (Page 23)

Amzer
®
Smart Keyboard, User Guide v3.00 © 2006 Page 23
Keyboard Settings
Driver Configuration Options
The following describe the various options used
for managing the Amzer-Professional driver.
• [√] Keyboard Active – Enable/Disable
connection between Amzer and Professional
keyboard. Disable connection when
keyboard is not being used.
•
[√] Enable Auto Repeat – Checking the
Enable Auto Repeat checkbox switches the
Auto Repeat function to on. While un-
checking the Enable Auto Repeat checkbox
switches the Auto Repeat function to off.
• Repeat delay – The rate at which the key depression occurs is set. The available
settings are Slowest, Slow, Normal, Fast, and Fastest.
• Repeat rate – The rate at which key input is repeated. The range of settings is from
(2 – 20) with the slowest at 2 and fastest repeat rate of 20.
• Keyboard Mode – Sets the default driver
input mode.
Standard mode emulates the PC style
“Repeating characters” when key is held
down. Auto Repeat must be enabled.
BlackBerry mode emulates the automatic-
upper case characters when key is held
down and insert special characters when
key is held down and Up/Down arrows are
pressed.
• Switch KB Mode – Is a user defined short-
cut key sequence used for switching
between the different driver input modes.
• [√] Enable mode change sound –
Audible notification indicating that the
driver’s input mode is about to be switched.
• Sound volume – Adjust the level of the
handset notification sound.
• [√] Enable mode change message – Visual notification indicating that the driver’s
input mode is about to change.