Cingular Amzer Smart Keyboard - Manual (Page 24)

Amzer
®
Smart Keyboard, User Guide v3.00 © 2006 Page 24
Keyboard Settings Continued
• Message duration – Length of time the notification message is displayed.
• Test Notification – Used to sample the audible and visual notification settings. Fine
adjustments can be made before leaving the preference property page.
•
[√] Connect/Disconnect sound –
Enable audio warning that the keyboard
connected or disconnected with driver.
• Sound volume – Adjust the level of the
handset notification sound.
• [√] Enable message notification –
Enable visual warning that the keyboard
connected or disconnected with driver.
• [√] Automatic brightness control –
Enables automatic backlight control when a
key is pressed on the Professional
keyboard.
• Brightness off time (sec) – To conserve
the handset battery, the handset backlight
can be set to automatically shutoff when
no keys are pressed within the specified
time. The automatic shutoff range is ( 0 –
60 ) seconds.
• Automatic brightness level (%) – Default automatic brightness level. The range
is (10 – 100) percent in increments of 10%. When the backlight is automatically
turned on when a key is pressed it is set to this level.
• Manual brightness adjust (%) – The default Difference level that the backlight
will be set to when the backlight is manually controlled. The range is (10 – 100)
percent in increments of 10%.
Brightness - Manual = Actual Brightness
Example: 100 – 50 = 50
• Manual Control – To adjust backlight brightness manually use the following short-
cut
keys:
[Fn] + [+] Increase Intensity
[Fn] + [-] Decrease Intensity
• KeyPress sound type – Enable/Disable Key Press sound simulation.
• KeyPress sound volume – Adjust the level of the handset key-click sound
simulation.