Creek Audio STVG-989 - Manual (Page 10)

MAKING THE CONNECTIONS
9
CONNECTING A VIDEO COMPONENT FOR INPUT
Please follow the steps below to display CDG lyrics on the Singing Machine’s monitor from
another video source:
(1) Locate the multicolored patch cords.
(2) Connect video cable (yellow) to the Video In on the back of the Singing Machine.
(3) Connect the other end of the Video Cable (yellow) to the Video Output on another video
source such as a VCR.
(4) Set the FUNCTION Selector switch to AUX and the MONITOR Selector switch to
CDG/AUX.
(5) Adjust the BRIGHTNESS, CONTRAST and VERTICAL HOLD Controls at the back of
the Singing Machine to have the best picture quality.
AUDIO CONNECTION
Connect the unit to your TV or home stereo system using the White and Red connections on the
supplied patch cord. Plug the white end of the patch cord into the white AUX OUT jack on the
unit. Plug the red end of the patch cord into the red AUX OUT jack on unit. Now connect the other
end of the cable’s white (left channel) and red (right channel) plugs to your TV or home stereo
system’s ‘AUDIO IN’ or ‘AUX IN’ jacks.
VIDEO
INPUT
AUDIO
INPUT
R L
AUX OUTPUT
L
(White Jack)
REAR VIEW OF TV
AUDIO INPUT
L
(White Jack)
AUX OUTPUT
R
(Red Jack)
AUDIO INPUT
R
(Red Jack)
REAR VIEW OF
SINGING MACHINE
VIDEO
OUT
AUDIO
OUT
R L
VIDEO INPUT
(Yellow Jack)
VIDEO OUTPUT
(Yellow Jack)
REAR VIEW OF
SINGING MACHINE REAR VIEW OF VCR
R
L
OUT IN
AUX
IN
OUT
VIDEO
R
L
OUT IN
AUX