Cub Cadet 59A40003727 - Manual (Page 21)

21
Backblading
Position the bucket at an angle of less than 45º and
backup slowly. See Figure 28
Backgrading or backblading with bucket tilted too far
will result in damage to tilt cylinders and void warranty.
See Figure 28.
figure 28
Loading Low Trucks or Spreaders from a Pile
For easier loading, minimize the angle of turn and
length of run between pile and spreader. See Figure
26.
figure 26
Backgrading
Backgrade occasionally with a loaded bucket to keep
the working surface free of ruts and holes. Also, hold
the control lever forward so the full weight of the
bucket is scraping the ground. Use the heel of the
bucket. See Figure 27.
figure 27
Correct
NOT Correct