Canon iP1800 Series User Manual
Page 34
30
Routine Maintenance
z
The function for detecting the remaining ink level will be disabled.
Replace the empty ink cartridge immediately after the printing. The resulting print quality is
not satisfactory, if printing is continued under the ink out condition.
If the ALARM lamp flashes orange sixteen times
z
Ink may have run out.
z
Click Delete Job to cancel the current printing job. Click Stop Job to stop the current printing
job. Click Stop All Jobs to stop all printing jobs. Replace the ink cartridge with a new one.
z
The function for detecting the remaining ink level will be disabled since the ink level cannot be
correctly detected.
If you want to continue printing without this function, press the RESUME button for at least 5
seconds.
z
Canon recommends to use new genuine Canon cartridges in order to obtain optimum
qualities.
z
Please be advised that Canon shall not be liable for any malfunction or trouble caused by
continuation of printing under the ink out condition.