Clarion DXZ925 - Manual (Page 20)

24
DXZ925
280-7752-00
English
CD/MD/DVD changer functions
When an optional CD/MD/DVD changer is con-
nected through the CeNET cable, this unit con-
trols all changer functions. This unit can control
a total of 2 changers (MD or CD or DVD).
Press the [FNC] button and select the CD/MD/
DVD changer mode to start play. If 2 changers
are connected, press the [FNC] button to select
the changer for play.
∗ If “NO MAGAZINE” appears in the display, insert
the magazine into the changer. “LOADING” appears
in the display while the player loads (checks) the
magazine.
∗ If “NO DISC” appears in the display, eject the maga-
zine and insert discs into each slot. Then, reinsert
the magazine back into the changer.
CD/MD/DVD Changer Operations
8. OPERATIONS OF ACCESSORIES
CAUTION
CD-ROM discs and CD-R discs cannot be
played in the CD changer.
Pausing play
1. Press the [ ] button to pause play.
“PAUSE” appears in the display.
2. To resume play, press the [ ] button again.
Selecting a DISC
Each [DIRECT] button corresponds to a disc
loaded into the magazine.
●Selecting a disc from 1 to 6
Press the corresponding [DIRECT] button (1 to
6) to select the desired disc.
●Selecting a disc from 7 to 12 (only when a
12 disc CD changer is used.)
Press and hold the [DIRECT] button (1 to 6) for
1 second or longer to select the desired disc.
∗ If a DISC is not loaded in a slot of magazine, press-
ing the [DIRECT] button corresponding to its disc
number is invalid.
Selecting a track
●Track-up
1. Press the [
d] button to move ahead to the
beginning of the next track.
2. Each time you press the [ d] button, the
track advances ahead to the beginning of the
next track.
●Track-down
1. Press the [
a] button to move back to the
beginning of the current track.
2. Press the [ a] button twice to move to the
beginning of the previous track.
Fast-forward/fast-backward
●Fast-forward
Press and hold the [
d] button for 1 second or
longer.
●Fast-backward
Press and hold the [
a] button for 1 second or
longer.
Top function
The top function plays from the first track or
chapter of the disc.
●When playing a disc 1 to 6
Press the [DIRECT] button (1 to 6) with the
same number as the DISC playing.
●When playing a disc 7 to 12 (only when a
12 disc CD changer is used.)
Press and hold for 1 second or longer the [DI-
RECT] button (1 to 6) with the same number as
the DISC playing.
∗ If a DISC is not loaded in a slot of magazine, press-
ing the [DIRECT] button corresponding to its disc
number is invalid.
Scan play
Scan play locates and plays the first 10 seconds
of each track on a disc automatically. This func-
tion continues on the disc until it is cancelled.
∗ The scan play is useful when you want to select a
desired track.
1. Press the [SC] button to start track scanning.
“SCN” lights in the display.
2. To cancel the scan play, press the [SC] but-
ton again. “SCN” goes off from the display
and the current track continues to play.
280-7752-00_Eng 12/12/01, 6:38 PM 24