Dell POWEREDGE R710 - Manual (Page 30)

Dell HPC Tiered Storage Solution
Page 28
Please specify hostname of the CommServe below. Make sure the
hostname is fully qualified, resolvable by the name services
configured on this machine. CommServe Host Name:
mycommserve.company.com
21. Press Enter.
Commcell Level Global Filters are set through Simpana GUI's
Control Panel in order to filter out certain directories or files
from backup Commcell-widely. If you turn on the Global filters,
they will be effective to the default subclient. There are three
options you can choose to set the filters.
1) Use Cell level policy
2) Always use Global filters
3) Do not use Global filters
Please select how to set the Global Filters for the default
subclient? [1]
22. Type the appropriate number to select the Client Group and press Enter.
Client Group(s) is currently configured on CommServe
mycommserve.company.com. Please choose the group(s) that you want
to add this client angel.company.com to. The selected group(s)
will be marked (X) and can be deselected if you enter the same
number again. After you are finished with the selection, select
"Done with the Selection".
[ ] 1) Unix
[ ] 2) DR
[a=all n=none r=reverse q=quit d=done >=next <=previous ?=help]s
Enter number(s)/one of "a,n,r,q,d,>,<,?" here: 2
23. Enter the number corresponding to the storage policy through which you want to back up the
External Data Connector and press Enter.
Please select one storage policy for this IDA from the list
below:
1) SP_StandAloneLibrary2_2
2) SP_Library3_3
3) SP_MagLibrary4_4
Storage Policy: [1]
24. Type “3” for the Exit option and press Enter. The installation is now complete.