Crestron electronic SMK-6X - Manual (Page 12)

Swivel Mount Kit for TPS-6X Crestron SMK-6X
Customize Range
Aside from the permanently installed limiting screw attached to the swivel stop plate,
two additional limiting screws are provided with your SMK-6X kit. These screws are
provided to set a custom range of swivel movement. Refer to the illustrations below
for their application.
Swivel Stop Plate with Permanent Limiting Screw
TAB OF KEYED METAL WASHER
STARTS SWIVEL MOTION FROM
FRONT OF THE MOUNTING SURFACE
SIX LOCATIONS FOR
ADDITIONAL LIMITING
SCREWS (SYMMETRIC)
PERMANENT LIMITING SCREW
POSITIONED AWAY FROM FRONT
EDGE OF MOUNTING SURFACE
30°
90°
135°
Swivel Stop Plate with Additional Limiting Screws
TWO LIMITING SCREWS
INSTALLED TO LIMIT SWIVEL TO
A CUSTOM RANGE
PERMANENT LIMITING SCREW
8 • Swivel Mount Kit for TPS-6X: SMK-6X Installation Guide – DOC. 6577A