Crestron electronic SMK-6X - Manual (Page 8)

Swivel Mount Kit for TPS-6X Crestron SMK-6X
CAUTION: Use caution when cutting the grommet to prevent damage to the
connecting cable. Damage to this cable can result in loss of functionality in the
TPS-6X.
Preparing the TPS-6X-DS (1 of 2)
Remove These
Screws Using a
1/16" Allen
Wrench
Remove These Phillips
Head Screws Using a
No.1 Phillips Screwdriver
Rear Cover
Grommet
Cable
Preparing the TPS-6X-DS (2 of 2)
Do Not Remove Rear Cover
Blank Grommet
Bottom Cutout
In Baseplate
Cable
Boot
Connector
4 • Swivel Mount Kit for TPS-6X: SMK-6X Installation Guide – DOC. 6577A