Dell 3110cn Color Laser Printer - Manual (Page 148)

Wireless Net
Use the Wireless Net menu to change print settings affecting jobs sent to the printer through a wireless
network.
NOTE: The Wireless Net menu is only displayed when an optional multi protocol card is installed on
the printer and the optional wireless printer adapter is installed on the card.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Status
Purpose:
To display the information on the wireless signal strength. Any change cannot be made on the operator
panel to improve the status of the wireless connection.
Values:
Good
Indicates good signal strength.
Acceptable
Indicates marginal signal strength.
Low
Indicates insufficient signal strength.
No Reception
Indicates that no signal is received.
Reset Wireless
Purpose:
To initialize wireless network settings. After executing this function and rebooting the printer, all wireless
network settings are reset to their default values.
TCP/IP
Purpose:
To specify the TCP/IP settings for the wireless network. The change becomes effective after the printer is
turned off and then on again.