Dell 3110cn Color Laser Printer - Manual (Page 41)

LPD Connection Time-Out Sets the connection timeout period from 1 to 1000 seconds.
IP Filter (IPv4) To set the IP Filter settings, click IP Filter . The IP Filter
page is displayed.
Port9100 Port Number Sets the port number from 9000 to 9999.
Connection Time-Out Sets the connection timeout period between 1 and 1000
seconds.
IP Filter (IPv4) To set the IP Filter settings, click IP Filter . The IP Filter
page is displayed.
IPP* 1 Printer URI Displays the printer URI.
Connection Time-Out Sets the connection timeout period from 1 to 1000 seconds.
Port Number Displays the port number for receiving requests from the
client.
Maximum Sessions Displays the maximum number of connections received
simultaneously by the client.
WSD Port Number Sets the port number from 8000 to 9999.
Receive Time-Out Sets the receive timeout period from 1 to 65535 seconds.
Notification Time-Out Sets the notification timeout period from 1 to 60 seconds.
Maximum Number of TTL Sets the maximum number of TTL from 1 to 10.
Maximum Number of
Notification Sets the maximum number of notifications from 10 to 20.
HTTP Port Number Sets the port number to 80 or from 8000 to 9999.
Simultaneous
Connections Displays the maximum number of connections received
simultaneously by the client.
Connection Time-Out Sets the connection timeout period from 1 to 255 seconds.
FTP Password Sets whether to enable or disable the password. And also
specifies the password value up to 7 characters.
Connection Time-Out Sets the connection timeout period from 1 to 1000 seconds.
IP Filter
(IPv4) *
2
Address Sets the address in the address field. Enter a numeric value
between 0 and 255 in each field of "aaa.bbb.ccc.ddd."
However, 127 and 224 to 254 cannot be used to "aaa."
Address Mask Sets the Subnet Mask in the Mask field. Enter a numeric value
between 0 and 255 in each field.
*1 An optional multi protocol card is required to display the item.