Automatic configuration using the modular, Disk configuration utility – Dell PowerVault MD3220i User Manual

Page 39

Advertising
background image

Post Installation Tasks

39

Automatic Configuration Using the Modular Disk Configuration Utility

NOTE:

If PowerVault MDCU is not installed, it can be installed from the PowerVault

MD series resource media.

PowerVault MDCU provides a consolidated approach for configuring the iSCSI

network of host servers and iSCSI-based storage arrays using a wizard-driven

interface. This utility also enables the user to configure the iSCSI sessions of the

host server according to the best practices and to achieve load-balanced paths

with the storage array iSCSI host ports.

NOTE:

PowerVault MDCU is only applicable to iSCSI-based PowerVault MD3200i

series storage arrays. It does apply to SAS-based PowerVault MD3200 series

storage arrays.

If you select Launch the MDCU after reboot during the installation of the

host software, the utility automatically launches after the next host server

reboot. This utility can also be launched manually.
The utility has a context sensitive online help to guide you through each step

of the wizard.
The PowerVault MDCU performs:

• Storage array configuration
• Host configuration

Storage Array Configuration

Before a host iSCSI initiator and an iSCSI-based storage array can

communicate, they must be configured with information such as which IP

addresses and authentication method to use. Since iSCSI initiators establish

connections with an already configured storage array, the first task is to

configure your storage arrays to make them available for iSCSI initiators.
This utility requires network access to the management ports of the storage arrays

you wish to configure. You must have a properly functioning network

infrastructure before attempting to configure your storage arrays. If your storage

arrays are already configured, you can skip directly to the host configuration.
This configuration task generally involves the following steps:

1 Discover available storage array(s) for configuration.
2 Select a storage array to configure.
3 Set a storage array name and password.

book.book Page 39 Sunday, September 11, 2011 10:24 PM

Advertising
This manual is related to the following products: