Canon OPTURA10 - Manual (Page 24)

24
Mastering the Basics
E
Using the Wireless Controller
You can operate the camcorder with the
supplied wireless controller from a distance of
up to 16 feet (5 m). Point it at the camcorder’s
remote sensor when you press the buttons.
Following functions cannot be operated
without the wireless controller:
• Some special playback modes ( 38)
• Photo/date search ( 86)
• Zero set memory ( 87)
• AV Insert ( 95)
• Audio dubbing ( 97)
❍ Camcorder and wireless controller are equipped with 2 remote sensor modes
( 48). If the wireless controller does not work, check if camcorder and
wireless controller are set to the same mode.
❍ The wireless controller may not work properly in bright places, such as
outdoors under direct sunlight, or when used too close to the camcorder.
❍ The operable range of the wireless controller may shorten when the
camcorder’s remote sensor is exposed to strong light.
❍ When the batteries run out, replace both at the same time.
Inserting Batteries
The wireless controller operates with two AA batteries.
1. Open the battery cover.
2. Insert the batteries following the +
and – markings.
3. Close the battery cover.
q
w
e