Clarity DECT6.0 - Manual (Page 13)

22 23
Chain dialing
This feature allows you to initiate a dialing sequence from numbers stored in
the directory, call log or redial list while you are on a call.
Chain dialing can be useful if you wish to access numbers other than phone
numbers (such as bank account information or access codes) from the
directory, call log or redial list.
To access a number in the directory while on a call:
1. Press <MENU/SELECT>, then <UP/DOWN> to select Directory.
2. Press <MENU/SELECT>, then <UP/DOWN> or press the dial pad keys
(0 through 9) to find the desired entry.
3. Press <MENU/SELECT>. The telephone automatically dials the displayed
number.
To access a number in the call log history while on a call:
1. Press <MENU/SELECT>, then<UP/DOWN> to select Call log.
2. Press <MENU/SELECT>, then<UP/DOWN> to scroll to the desired
entry. (Press # to view the dialing options, if necessary.
3. Press<MENU/SELECT>. The telephone automatically dials the displayed
number.
To access the redial list while on a call:
1. Press<REDIAL/PAUSE>. The screen shows the number most recently
called. If it is not the desired number, Press<UP/DOWN> to scroll to the
desired number.
2. Press<MENU/SELECT>. The handset dials the displayed number.
Note: Press <TALK OFF/CLEAR> to exit the directory, call log history or
redial list and return to the call without dialing the displayed number.
Redial list
You can redial up to 20 of the last numbers called. If you have stored a name
in the directory to go with the number, the name will be displayed instead. The
most recent last number will display at the top of the redial list.
To Review the redial list entry
1. In idle mode, press <REDIAL/PAUSE> to access redial list
2. Press <UP/DOWN>, or press <REDIAL/ PAUSE> repeatedly to review
the redial list entry.
To Redial a Number from the Redial List
1. Follow the steps in the previous section.
2. Press <TALK ON/FLASH> or <SPEAKER> to dial the selected redial
number.
To Store a Redial Number into the Directory
1. Follow the steps in the section under “To Review the redial list entry”
above.
2. Press<MENU/SELECT> twice, then use the keypad to edit the number
if necessary,
3. Press<MENU/SELECT> and use the keypad to enter the name
4. Press<MENU/SELECT> to save.
To Delete a Redial Number
1. Follow the steps in the section under “Review the redial list entry” on
the preceding page.
2. While reviewing a number in the redial list, press <MUTE /X> to delete
the selected entry. A confirmation tone sounds.
USING YOUR PHONE USING YOUR PHONE