Dell XPS 730 H2C (Late 2008) - Manual (Page 42)

System Setup Options—Dell XPS 730X
devices: HD Audio, Onboard LAN connector,
Onboard LAN Boot ROM, and Side logo. Serial ATA
Configuration can be set to IDE or AHCI mode.
CPU Configuration Allows you to enable or disable the CPU features that
enhance the performance of the system.
USB Configuration Allows you to enable or disable the USB controller.
Power
ACPI Suspend Type Specifies the ACPI suspend type. The default is S3.
Auto Power On Allows you to enable or disable an alarm to turn on
the computer automatically.
AC Recovery Specifies the behaviour of the system after
recovering from a power loss.
¡ Power on — The computer turns on
after it recovers from a power failure.
¡ Power off — The computer remains
powered off.
¡ Last state— The computer returns the
power state it was in before the power
failure.
HDD Acoustic Mode Determines the acoustic mode at which the hard
drive operates.
Bypass — Do nothing (needed for older drives).
Quiet — The hard drive operates at its most quiet
setting.
Performance — The hard drive operates at its
maximum speed.
NOTE: Switching to performance mode may cause an
increase in noise produced by the drive, but does not
affect the drive's performance.
Boot
Boot Device Priority Sets the boot priority among the available devices.
Hard Disk Boot Priority Sets the hard drive boot priority. The items displayed
are dynamically updated according to the hard drives
detected.
CD/DVD Boot Priority Sets the optical drive boot priority. The items
displayed are dynamically updated according to the
optical drives detected.
Boot Settings Configuration Allows the BIOS to skip certain tests while booting.
This decreases the time needed to boot the system.
Security Allows you to set or change the supervisor password.
Exit
Exit Options Provides options to Save Changes and Exit, Discard
Changes and Exit, Load Optimal Defaults, and
Discard Changes.
System Information
Product Name XPS 730X.
BIOS Version Displays the BIOS version number and date
information.
Input Service tag Allows you to input the service tag.
Service Tag Displays the service tag of the computer.
Asset Tag Displays the Asset tag of the computer.
Memory Installed Indicates amount of memory installed.