Dell C3760n Color Laser Printer - Manual (Page 205)

Understanding the Printer Menus 203
Select a high value if your printer is in constant use. In most circumstances, this keeps the printer ready to operate
with minimum warm-up time.
Select a value between 1 and 60 minutes for power saver mode if you want a balance between energy consumption
and a shorter warm-up period.
The printer automatically returns to the standby mode from the power saver mode when it receives data from the
computer. You can also change the status of the printer to the standby mode by pressing any button on the operator
panel.
If the Auto-Off Timer feature turns off the printer, the printer cannot be turned back on automatically. To turn the
printer back on, physically turn the power switch of the printer to On.
Auto Reset
Purpose:
To automatically reset the settings to the default settings and return to the standby mode after you do not specify
any settings for the specified time.
Values:
Fault Time-out
Purpose:
To specify the amount of time the printer waits before canceling a job that stops abnormally. The print job is cancelled if the
time-out time is exceeded.
Values:
Job Time-out
Purpose:
To specify the amount of time the printer waits for data to arrive from the computer. The print job is cancelled if the time-out
time is exceeded.
Values:
45sec *
1min
2min
3min
4min
Off Disables the fault time-out.
On * 60 seconds * Sets the amount of time the printer waits before canceling a job that stops
abnormally.
Available Range:
3-300 seconds
Off Disables the job time-out.
On * 30 seconds * Sets the time the printer waits for data to arrive from the computer.
Available Range:
5–300 seconds