Dell C3760n Color Laser Printer - Manual (Page 215)

Understanding the Printer Menus 213
Color Reg Adjust
Purpose:
To manually perform color registration adjustment.
Manual Color Registration Adjustments are required when the printer is initially installed and after the printer is
moved.
NOTE: The Color Reg Adjust feature can be configured when Auto Reg Adjust is set to Off .
Values:
Reset Defaults
Purpose:
To initialize the non-volatile (NV) memory. After executing this function and rebooting the printer, all the menu
parameters are reset to their default values.
Initialize Print Meter
Purpose:
To initialize the print meter of the printer. When the print meter is initialized, the meter count is reset to zero.
Reset Fusing Unit
Purpose:
To initialize the life counter of the fusing unit. After replacing the fusing unit, be sure to initialize its life counter.
Reset Transfer Belt Unit
Purpose:
To initialize the life counter of the transfer belt unit. After replacing the transfer belt unit, be sure to initialize its life
counter.
Auto Correct Cancel * Does not perform color registration correction.
Start Automatically performs color registration correction.
Color Regi Chart Yes Prints a color registration chart. The color registration chart prints a lattice pattern of
yellow, magenta, and cyan lines. On the chart, find the values on the right side that are
next to the line that is perfectly straight for each of the three colors. If the value for this
line is 0, color registration adjustment is not required. If the value for this line is any
value other than 0, specify the adjustment values under lateral adjustment and process
adjustment in Enter Number .
No * Does not print a color registration chart.
Enter Number LY Available Range:
-9 to +9
Sets lateral (perpendicular to paper feed direction) and process
(paper feed direction) color adjustment values individually for
Yellow, Magenta, and Cyan. Enter a number in order of lateral
adjustment (left), lateral adjustment (right), and process
adjustment. Press the (Set) button to save all the settings.
LM
LC
RY
Available Range:
-9 to +9
RM
RC
PY
Available Range:
-9 to +9
PM
PC