Dell 1420X Projector - Manual (Page 36)

Projector Settings
Select and press to activate Projector settings. The Projector settings menu
provides the following options:
Advanced Settings
Image Settings
Display Settings
Projector Settings
Menu Settings
Power Settings
Information
Auto Source
Projector Mode
Speaker
Closed Caption
High Altitude Mode
Startup Screen
Dell
Off
Front
On
Off
Off
Dell
1420X
Test Pattern 2 Off
Factory Reset Press
Resolution: 1440x1050
A UTO S OURCE —Select Off (the default) to lock the current input signal. If you press
the Source button when the Auto Source mode is set to Off, you can manually
select the input signal. Select On to auto detect the available input signals. If you
press the Source button when the projector is on, it automatically finds the next
available input signal.
P
ROJECTOR M ODE —Allows you to select the projector mode, depending upon how
the projector is mounted.
• Front — This is the default option.
• Front Ceiling — The projector turns the image upside down for ceiling-mounted
projection.
• Rear — The projector reverses the image so that you can project from behind a
translucent screen.
• Rear Ceiling — The projector reverses and turns the image upside down. You can
project from behind a translucent screen with a ceiling-mounted projection.
S PEAKER —Select On to enable the speaker. Select Off to the disable speaker.
C LOSED C APTION —Select On to enable close caption and activate the closed caption
menu. Select appropriate closed caption options: CC1, CC2, CC3, and CC4.
NOTE: Closed Caption option is available for NTSC only.
Using Your Projector 36