Dell PowerVault TL1000 - Manual (Page 53)

second digit configures Column 5, Tier 1 of the magazine as an I/O Station
(0 when disabled, and 1 when enabled). The Auto Cleaning function can be
enabled only if there is at least one inactive position in the magazine. If Auto
Cleaning is enabled, the inactive positions become cleaning cartridge
positions.
3. Click Submit to enable the settings.
Physical library settings
To configure the library cartridge assignment settings, complete the following
procedure:
1.
Expand Configure Library, if necessary, and click Physical in the left
navigation pane of the Web User Interface.
2. Select the Library settings.
v Library name - Enter a name for your library.
v Auto Cleaning - Automatically cleans the drive when the drive requests that
cleaning and a cleaning cartridge is present in the library. Auto cleaning can
be enabled only when there is at least one inactive position in the magazine
in the library.
v Bar code label length - Use to choose the number of characters in the
cartridge bar code that is reported to the host computer.
3. Click Submit to enable the settings.
a29z0123
Figure 3-15. Cartridge assignment settings
Chapter 3. Installation and configuration 3-15