Dell PowerVault TL1000 - Manual (Page 57)

To modify the encryption settings:
1.
Expand Configure Library, if necessary, and click Encryption in the left
navigation pane of the Web User Interface.
2. In the Encryption method: drop-down menu, choose Application Managed to
enable encryption in your library. No further configuration steps are necessary.
Note: Library Managed Encryption and System Managed Encryption are not
supported in this Library. Library Managed Encryption configuration
options and Keypath Diagnostics menus are greyed out in the Library
Web Interface.
3. Click Submit to enable the settings.
a29z0200
Figure 3-19. Encryption enabled settings
Chapter 3. Installation and configuration 3-19
|
|
|
|
|
|