Dell PowerVault 50F (Fibre Channel Switch) - Manual (Page 10)

Introduction: Dell PowerVault™ 50F 8-Port Fibre Channel Switch User's Guide
file:///C|/Users/sharon_anand/Desktop/PowerVault/50f_enug/INTROD.HTM[3/15/2013 11:27:27 AM]
The FL_Port may be attached to either private NL_Ports or public NL_Ports. The FL_Port manages loop
communication and initialization. NL_Ports realize the same benefits as N_Ports directly connected to the
Fabric.
If your installation requires installing a single GBIC module on this card, the unused port position is protected
by a metal, spring-loaded door.
SWL Fiber-Optic GBIC Module
The SWL fiber-optic GBIC module is based on short wavelength CD lasers supporting 1.0625 Gbps link
speeds. This GBIC module supports 50-micrometer and 62.5-micrometer multimode fiber and is supported
only in non-OFC (Open Fibre Connection) mode. 50/125-micrometer cables up to 500 meters (m) in length
and 62.5/125-micrometer cables up to 175 m in length are supported.
NOTE: The SWL GBIC module uses a Class 1 CD laser, which complies with the 21 CFR, subpart (J) as of the date of
manufacture.
Copper GBIC Module
The copper GBIC module is based on the High-Speed Serial Data Connection (HSSDC) interface standards.
The GBIC provides a female HSSDC connector.
HSSDC-to-HSSDC cables of 6 and 12 m have been qualified. Standard cables with HSSDC-to-DB9 male
connectors are also available in lengths of 3, 6, and 12 m.
Back to Contents Page