Dell Precision T1600 (Early 2011) - Manual (Page 78)

Error Message Description
Memory address line failure at address,
read value expecting value
A memory module may be faulty or
improperly seated. Reinstall the memory
modules and, if necessary, replace them.
Memory allocation error The software you are attempting to run is
conflicting with the operating system,
another program, or a utility.
Memory data line failure at address, read
value expecting value
A memory module may be faulty or
improperly seated. Reinstall the memory
modules and, if necessary, replace them.
Memory double word logic failure at
address, read value expecting value
A memory module may be faulty or
improperly seated. Reinstall the memory
modules and, if necessary, replace them.
Memory odd/even logic failure at address,
read value expecting value
A memory module may be faulty or
improperly seated. Reinstall the memory
modules and, if necessary, replace them
Memory write/read failure at address,
read value expecting value
A memory module may be faulty or
improperly seated. Reinstall the memory
modules and, if necessary, replace them.
Memory size in CMOS invalid The amount of memory recorded in the
computer configuration information does
not match the memory installed in the
computer.
Memory tests terminated by keystroke A keystroke interrupted the memory test.
No boot device available The computer cannot find the floppy disk
or hard drive.
No boot sector on hard-disk drive The computer configuration information in
System Setup may be incorrect.
No timer tick interrupt A chip on the system board might be
malfunctioning.
Non-system disk or disk error The floppy disk in drive A does not have a
bootable operating system installed on it.
Either replace the floppy disk with one that
has a bootable operating system, or
remove the floppy disk from drive A and
restart the computer.
Not a boot diskette The operating system is trying to boot to a
floppy disk that does not have a bootable
78