Dell PowerEdge M710HD - Manual (Page 150)

150 Using the System Setup Program and UEFI Boot Manager
Entering the UEFI Boot Manager
1 Turn on or restart your system.
2 Press <F11> after you see the following message:
<F11> = UEFI Boot Manager
NOTE: The system does not respond until the USB keyboard is active.
NOTE: The Boot Mode option in System Setup must be set to UEFI to access
the UEFI Boot Manager.
If your operating system begins to load before you press <F11>, allow the
system to finish booting, and then restart your system and try again.
UEFI Boot Manager Screen
UEFI Boot Settings Screen
Option Description
Continue Selecting this option executes the current boot options
in listed order.
<Boot options> The list of current boot options is displayed, with an
asterisk. Select the boot option you wish to use and
press <Enter>.
UEFI Boot Settings Enables you to add, delete, enable, disable, and change
boot options, or execute a one-time boot option.
System Utilities Enables you to access the legacy System Setup program,
System Services, and BIOS-level boot options.
Option Description
Add Boot Option Adds a new boot option.
Delete Boot Option Deletes an existing boot option.
Enable/Disable Boot
Option
Disables and enables a boot option in the boot option
list.
Change Boot Option Changes the order of the boot option list.
One-Time Boot From File Sets a one-time boot option not included in the boot
option list.