Dell A960 All In One Personal Printer - Manual (Page 8)

# Use the: To:
1 Power supply connector Supply power to the printer.
2 Wall jack connector Connect your printer to an active telephone line to send and receive
faxes. Your printer must be connected to this telephone line to receive
incoming fax calls.
NOTE: Do not connect additional devices to the wall jack connector and
do not connect a DSL (digital subscriber line), ISDN (integrated services
digital network), or cable modem to the printer.
3 Data/fax modem, answering
machine, and telephone
connector Remove the plug to connect additional devices, such as a data/fax
modem, telephone, or answering machine to your printer.
NOTE: Do not connect additional devices to the wall jack connector, and
do not connect a DSL (digital subscriber line), ISDN (integrated services
digital network), or cable modem to the printer.
4 USB cable connector Connect your printer to a computer.
Setting Up Your Printer
NOTE: The Dell Personal All-In-One Printer A960 supports the Windows XP and Windows 2000
operating systems.
Follow the instructions on your printer Setup Diagram to install the hardware and software. For setup
troubleshooting, see
Setup Problems .
You can use the Dell™ AIO Printer A960 to do a variety of things. A few important things to note:
If your printer is attached to a computer, you can use either the printer operator panel or the printer
software to create your projects.
You do need to attach your printer to a computer to scan.
You do need to attach your printer to a computer to print.
You do not need to attach your printer to a computer to make photocopies.
You do not need to attach your printer to a computer to send faxes.
NOTE: The printer must be connected to a telephone line for faxing to function (attached to a
computer or unattached).
Installing the Operator Panel
The following instructions apply only if you received an additional language operator panel with your printer.
1.