4 remove the filler bracket (if applicable) – Dell OptiPlex 360 (Late 2008) User Manual
Page 43
Advertising
Cards
43
4 Remove the filler bracket (if applicable).
NOTE:
For information on configuring the adapter, making internal
connections, or customizing it for your computer, see the documentation that
came with the adapter.
5 Align the PS/2 serial-port adapter bracket in the slot and press down firmly.
Ensure that the adapter is fully seated in the slot.
Before you close the card retention mechanism, ensure that:
• The tops of all cards and filler brackets are flush with the alignment
guide.
• The notch in the top of the card or filler bracket fits around the
alignment guide.
1
card retention latch
2
alignment guide
3
PS/2 serial adapter cable
1
2
3
Advertising