CREATIVE Sound Blaster - Manual (Page 22)

Installing Sound Blaster 2-6
Connecting
Microphones You can connect a condenser microphone, usually fitted with a 3.5 mm plug, to
Sound Blaster.
Connecting
Headphones You can connect personal stereo headphones, usually fitted with a 3.5 mm stereo
plug, such as those used for portable audio players, to Sound Blaster.
Note: When headphones are plugged in, speaker output is muted. Headphones volume is
controlled by the headphones volume control, see Adjusting Headphones Volume below.
Adjusting Headphones
Volume The volume output to the Headphones jack is a combination of the mixer output
volume from the system, and the Headphones Volume control on Sound Blaster.
You can adjust the headphones volume by using the Headphones Volume Control
or Creative Surround Mixer.
Using the Headphones Volume control:
❑ Left to decrease the headphones volume.
❑ Right to increase the headphones volume.
Use a ¼ " to 3.5 mm adapter
for headphones or
microphones with ¼ " plugs.
Figure 1-7: Headphones Volume Control.