Dell 1600n Multifunction Mono Laser Printer - Manual (Page 115)

Redialing
To redial the number you last called:
Press <Redial/Pause>.
When a document is loaded in the ADF (Automatic Document Feeder; see page 120 ), the multi-function
printer automatically begins to send.
For the document loaded on the scanner glass, the display asks if you want to load another page. Select
"1:Yes" to add. Otherwise, select "2:No"
Sending Broadcasting Faxes
Using the <Broadcasting> button on the operator panel, you can use the broadcasting fax feature, which
allows you to send a document to multiple locations. Documents are automatically stored in the memory and
sent to a remote station. After transmission, the documents are automatically erased from the memory.
Load the document(s) face up with top edge in first into the ADF. 1.
OR
Place a single document face down on the scanner glass.
For details about loading a document, see page 120 .
Adjust the document resolution to suit your fax needs (see page 122 ). 2.
If you need to change the contrast, see page 118 .
Press <Broadcasting> on the operator panel. 3.
Enter the number of the remote machine using the number keypad. 4.
You can also use one, two, or three-digit speed dial or group dial numbers. For details, see "Automatic
Dialing" on page 128 .
Press <Select> to confirm the number. The display asks you to enter another fax number to send the
document to.
NOTE: Your multi-function printer can send one broadcasting fax to multiple destinations. The
"Enter Number" prompt does not appear if a broadcast is set up and not completed. You must
wait until the current broadcast is completed.
5.
If you want to enter more fax numbers, repeat steps 4 and 5. You can add up to 10 destinations. 6.
Note that you cannot use more than one group dial number per broadcast operation.
7.