Dell 1600n Multifunction Mono Laser Printer - Manual (Page 35)

Network Status Monitor Center
If your multi-function printer is connected to a network, you can use the Network Status Monitor Center.
Using the Network Status Monitor Center, you can launch the Dell Printer Configuration Web Tool and
manage the status of multiple printers on the network.
NOTE: This application is only available when the multi-function printer is connected to a network.
Click Start Programs Dell Dell Printers Dell Laser MFP 1600n Network Status
Monitor Center.
1.
Double-click a printer name to open its Status Monitor, or select Run to open a Status Monitor for a
particular printer. 2.
Select Update to change the appearance of the list of printers. 3.
Printer Settings Utility
Using the Printer Settings Utility window, you can set up fax system data options, and create and edit
Phonebook entries from your computer. You can also configure the destination launches when you use the
<Select Software> button on the operator panel, and update the firmware of the multi-function printer.
When you install the Dell software, the Printer Settings Utility is automatically installed.
For information about installing the software, see page 36 .
To open the Printer Settings Utility:
Click Start Programs Dell Dell Printers Dell Laser MFP 1600n Printer Settings
Utility.
1.