Dell POWEREDGE M1000E - Manual (Page 191)

Fabric OS MIB Reference 173
53-1001768-01
SW Agent Configuration group
5
SW Agent Configuration group
swAgtCmtyTable 1.3.6.1.4.1.1588.2.1.1.1.4.11
A table that contains, one entry for each community, the access control and parameters of the
community.
The table displays all of the community strings (read and write) if it is accessed by the “write”
community string. Only “read” community strings are displayed if it is accessed by the “read”
community string.
In Secure Fabric OS, the community strings can only be modified on the primary switch.
swAgtCmtyEntry 1.3.6.1.4.1.1588.2.1.1.1.4.11.1
An entry containing the community parameters.
Index swAgtCmtyIdx
swAgtCmtyIdx 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.1
The SNMPv1 community entry.
The return value for this entry is 1 through 6.
swAgtCmtyStr 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.2
This is a community string supported by the agent. If a new value is set successfully, it takes effect
immediately.
Default values for communities are as follows:
• 1 (Secret Code)
• 2 (OrigEquipMfr)
• 3 (private)
• 4 (public)
• 5 (common)
• 6 (FibreChannel)
Community strings 1-3 are read-write and strings 4-6 are read-only.
You can change the community setting using the snmpconfig command.
swAgtTrapRcp 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.3
This is the trap recipient associated with the community. If a new value is set successfully, it takes
effect immediately.