Dell 5530/dn Mono Laser Printer - Manual (Page 189)

Transparency print quality is poor
Try one or more of the following:
C
HECK THE TRANSPARENCIES
Use only transparencies recommended by the printer manufacturer.
C
HECK THE PAPER TYPE SETTING
Make sure the paper type setting matches the paper loaded in the tray:
1 From the printer control panel, check the Paper Type setting from the Paper menu.
2 Before sending the job to print, specify the correct type setting:
• For Windows users, specify the type from Print Properties.
• For Macintosh users, specify the type from the Print dialog.
Contacting Customer Support
When you call Customer Support, describe the problem you are experiencing, the message on the display, and the
troubleshooting steps you have already taken to find a solution.
You need to know your printer model type and serial number. For more information, see the label on the inside top
front cover of the printer. The serial number is also listed on the menu settings page.
For customer support, contact the place where you purchased your printer.
Troubleshooting
189