Dell PowerEdge VRTX - Manual (Page 713)

39
STOR Event Messages
STOR1
Message A device arg1 is in an unknown state.
Arguments
• arg1 = device name
Detailed
Description The controller cannot communicate with a device. The state of the device cannot be
determined. There may be a bad or loose cable, or a missing device, or a problem with the
driver or firmware.
Recommended
Response Action See the storage hardware documentation for information on checking the cables. Check for
problems with any enclosures attached to the system. Verify that the controller has a
supported version of the driver and firmware. Rebooting the system may resolve this problem.
Category Storage
SubCategory STOR = Storage
Severity Severity 2 (Warning)
Trap/EventID 4178
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
STOR2
Message SCSI sense data arg1 .
Arguments
• arg1 = args
Detailed
Description A SCSI device experienced an error, but may have recovered.
Recommended
Response Action No response action is required.
Category Storage
SubCategory STOR = Storage
713