Dell W5300 Workgroup Laser Printer - Manual (Page 66)

When duplex printing on letterhead from the trays, load it with the logo face up and entering the printer
first.
Using Duplex Bind
When you select duplex bind printing in the printer driver, you must select either long edge or short edge
binding, which are the values for this setting. The purpose of Duplex Bind is to define the way duplexed
pages are bound, and how the printing on the back of the sheet (even-numbered pages) is oriented in
relation to the printing on the front (odd-numbered pages).
The two values for Duplex Bind are:
Long Edge*
The asterisk (*)
indicates this is
the factory default
setting
Assumes binding along the long end of the page (left edge for portrait orientation and
top edge for landscape orientation). The following illustration shows long-edge binding
for portrait and landscape pages:
1 Portrait
2 Landscape
3 Back of sheet
4 Front of next sheet