Installing a hard drive – Dell OptiPlex GX260 User Manual
Page 94
1 tabs (2)
2 hard drive
Installing a Hard Drive
1. Check the documentation for the drive to verify that it is configured for your computer.
NOTICE:
To avoid damage to the drive, do not set it on a hard surface. Instead, set the drive on a surface, such as a
foam pad, that will sufficiently cushion it.
2. Unpack the replacement hard drive, and prepare it for installation.
3. If your replacement hard drive does not have the bracket rails attached, remove the rails from the old drive by
removing the two screws that secure each rail to the drive. Attach the bracket rails to the new drive by aligning the
screw holes on the drive with the screw holes on the bracket rails and then inserting and tightening all four screws (two
screws on each rail).
Hard Drive Bracket Rails