Dell M5200 Medium Workgroup Mono Laser Printer - Manual (Page 136)

Resetting
Maint Cnt Value The printer is resetting the counter
that tracks wear on the fuser. Wait for the message to clear.
Resetting the
Printer The printer is resetting to the
current default settings. Any active
print jobs are canceled. Wait for the message to clear.
See also: Using the operator panel to change
printer settings
Restoring Factory
Defaults The printer is restoring the factory
default printer settings. When
factory default settings are
restored:
All downloaded resources
(fonts, macros, symbol sets)
in the printer memory are
deleted.
All menu settings return to
the factory default setting
except:
The Display Language
setting in the Setup
Menu.
All settings in the
Network Menu and USB
Menu.
Wait for the message to clear.
See also: Restoring factory default settings
Toner Low The toner cartridge is low on toner. Shake the toner cartridge to utilize the
remaining toner.
Replace the toner cartridge.
Press Go to clear the message and
continue printing.
NOTE: If you do not replace the toner
cartridge, you may experience print quality
problems. Order more toner at
www.dell.com/supplies or
www.euro.dell.com/supplies.
Tray <x> Empty The specified tray is out of paper. Load paper in the tray to clear the message.
See also: Loading print media in standard and
optional trays
Tray <x> Low The specified tray is low on paper. Add paper to the tray to clear the message.
See also: Loading print media in standard and
optional trays
Tray <x> Missing The specified tray is either missing
or not fully inserted into the
printer. Insert the tray completely into the printer.
See also: Loading print media in standard and
optional trays
USB <x> The printer is processing data
through the specified USB port.