Dell M5200 Medium Workgroup Mono Laser Printer - Manual (Page 138)

See also: Canceling a print job
37 Insufficient
Defrag Memory The printer cannot defragment
flash memory, because the printer
memory used to store undeleted
flash resources is full. Delete fonts, macros, and other data in
printer memory.
Install additional printer memory.
37 Insufficient
Memory The printer memory is full and
cannot continue processing current
print jobs. Press Go to clear the message and
continue the current print job. The
printer frees memory by deleting the
oldest held job and continues deleting
held jobs until there is enough printer
memory to process the job.
Press Stop to clear the message
without deleting any held jobs. The
current job may not print correctly.
Press Menu to open the Job Menu and
cancel the current job.
To avoid this error in the future:
Delete fonts, macros, and other
data in printer memory.
Install additional printer memory.
NOTE: The messages 37 Insufficient
Memory and Held Jobs may be lost
alternate on the display.
See also: Accessing held jobs from the
operator panel ; Held Jobs may be lost
38 Memory Full The printer is processing data, but
the memory used to store pages is
full. Press Go to clear the message and
continue printing the job. The job may
not print correctly.
Press Menu to open the Job Menu and
cancel the current job.
To avoid this error in the future:
Simplify the print job by reducing
the amount of text or graphics on
a page and deleting unnecessary
downloaded fonts or macros.
Install additional printer memory.
See also: Canceling a print job
39 Complex Page The page may not print correctly
because the print information on
the page is too complex. Press Go to clear the message and
continue printing the job. The job may
not print correctly.
Press Menu to open the Job Menu and
cancel the current job.
To avoid this error in the future:
Reduce the complexity of the page
by reducing the amount of text or
graphics on the page and deleting
unnecessary downloaded fonts or
macros.
Set Page Protect to On in the
Setup Menu.
Install additional printer memory.
See also: Setup Menu