Dell M110 Projector - Manual (Page 41)

P OWER S ETTINGS — Select and press to activate power settings. The power
settings menu provides the following options:
P OWER S AVING —Select Off to disable Power Saving mode. By default,
the projector is set to enter power saving mode after 120 minutes of
no activity. A warning message appears on screen showing a 60
seconds countdown before switching to power saving mode. Press
any button during the countdown period to stop the power-saving
mode.
You can also set a different delay period to enter power saving mode.
The delay period is the time you want the projector to wait without
an input signal. Power saving can be set to 30, 60, 90, or 120 minutes.
If an input signal is not detected during the delay period, the
projector turns off. To turn on the projector, press the Power button.
LED M
ODE —Allows you to select between Normal or ECO mode.
Normal mode operates at full power level. ECO mode operates at a
lower power level which may provide longer LED life, quieter
operation, and dimmer luminance output on the screen.
I NFORMATION — The information menu displays the current M110 projector settings.
Using Your Projector 41