Canon CR-55 - Manual (Page 42)

38 Using the Scanner
Extremely
thin,
translucent
paper
Documents
with raggedly
torn
perforations
• Scanning the following types of documents may cause a paper jam or
malfunction. To scan these types of documents, make a photocopy of the
document and then scan the photocopy.
Placing Documents
This section describes how to place a document for scanning.
1
Pull out the document feed tray.
Note
• When scanning multiple documents, sort them into batches of uniform
paper quality and thickness and load each batch separately. Note that
loading mixed batches may cause paper jams.
• Load a maximum of 50 sheets or a document stack no higher than 0.2"
(5 mm) at a time.
• When scanning relatively thick (0.005" to 0.008" {0.15 mm to 0.2 mm})
documents, the feeding process may cause the document to curl and
cause paper jams at the document feed opening. For such documents,
load no more than 10 sheets at one time.
Wrinkled or
creased
documents
Curled
documents
Torn
documents
Documents
with paper
clips or
staples
Carbon
paper
Coated
paper