Canon CR-55 - Manual (Page 47)

Using the Scanner 43
Adjusting the Print Position
Before using the imprinter, adjust the print position.
1
Open the imprinter cover.
2
While squeezing in both sides of the print position adjustment lever, move the
print cartridge carriage up or down to adjust the print position.
Note
You can adjust the print position by moving the print cartridge carriage up
or down, so that the distance between the document bottom edge and the
center of text is one of three levels: either 1.8” (43.5 mm), 1.9” (47 mm), or
2.0” (50.5 mm). (All values are approximate.)
1.7” (43.5 mm)
from document
bottom edge 1.9” (47 mm)
from document
bottom edge 2.0” (50.5 mm)
from document
bottom edge
3
Gently close the imprinter cover.
Print Position Adjustment Lever
Carriage