Image level adjustment, Computer input – Canon LV-X4 LV-7230 User Manual
Page 32
32
Computer Input
Press the Point 7 8 button to
adjust value.
Press the MENU button and the On-Screen Menu will
appear. Press the Point
7 8
button to move the red frame
pointer to the Image Adjust Menu icon.
1
2
Press the Point
d
d
button to move the red frame pointer to
the item that you want to adjust, and then press the SET
button. The level of each item is displayed. Adjust each
level by pressing the Point
7 8
button.
Move the red frame pointer to
the item to be selected and
then press the SET button.
Image Adjust Menu
Press the Point
7
button to decrease contrast and the Point
8
button to increase contrast. (From 0 to 63.)
Press the Point
7
button to adjust image darker and the Point
8
button to adjust image brighter. (From 0 to 63.)
Contrast
Brightness
Press the Point
7 8
button to obtain better balance of contrast.
(From 0 to 15.)
Gamma
Store icon
Press the SET button at this
icon to store the adjustment.
Image Adjust Menu icon
Press the Point
7
button to lighten red tone and the Point
8
button to deepen red tone. (From 0 to 63.)
White balance (Red)
Press the Point
7
button to lighten green tone and the Point
8
button to deepen green tone. (From 0 to 63.)
White balance (Green)
Press the Point
7
button to lighten blue tone and the Point
8
button to deepen blue tone. (From 0 to 63.)
White balance (Blue)
Selected Image level
Press the Point
7
button or the Point
8
button for Color temp.
level that you want to select. (XLow, Low, Mid, or High)
Color temp.
Press the Point
7
button to soften the image and the Point
8
button to sharpen the image. (From 0 to 15.)
Sharpness
Image Level Adjustment
Resets all adjustment to their previous levels.
Reset
Closes the Image Adjust Menu.
Quit
Store
To store the image data adjusted manually, move the red frame
pointer to the Store icon and press the SET button. The message
“OK?” will appear. Select [Yes] to store manual adjustment.
To set this manual adjustment, select Custom by pressing the IMAGE
button or through the Image Select Menu (p31).
“OK?” message
Move the pointer to [Yes] and
then press the SET button.