Canon LV-X4 LV-7230 - Manual (Page 36)

36
Video Input
AV System Menu (Video or S-Video)
AV System Menu (Component)
Press the MENU button and the On-Screen Menu will
appear. Press the Point
7 8 button to move the red frame
pointer to the AV System Menu icon.
Press the Point d d button to move the red arrow pointer to
the system that you want to select and then press the SET
button.
1
2
If the projector cannot reproduce proper video image, it is
necessary to select a specific broadcast signal format among PAL,
SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.
Move the pointer to a system
and press the SET button.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
The projector automatically detects incoming video signal, and
adjusts itself to optimize its performance.
If the projector cannot reproduce proper video image, it is
necessary to select a specific component video signal format
among 480i, 575i, 480p, 575p, 720p, 1035i, and 1080i.
Auto
COMPONENT VIDEO SIGNAL FORMAT
Video or S-Video
Component
The projector automatically detects incoming video system, and
adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select system manually.
Auto
AV System Menu icon
This box indicates the system
being selected.
Move the pointer to a system
and press the SET button.
AV System Menu icon
This box indicates the system
being selected.
Video System Selection
✔
Note:
The AV System Menu cannot be selected when selecting RGB(Scart).