Figure 3-13 – Dell PowerVault NX3100 User Manual
Page 93
Advertising
Installing System Components
93
6 Holding the card by its edges, position the card so that the card-edge
connector aligns with the expansion-card connector on the expansion-card
riser.
7 Insert the card-edge connector firmly into the expansion-card connector
until the card is fully seated.
8 Close the expansion-card latch. See Figure 3-13.
Figure 3-13. Installing or Removing an Expansion Card
9 Connect any cables to the expansion card.
1
expansion-card riser
2
expansion-card latch
3
expansion card
3
2
1
Advertising