Dell Alienware 17 (Mid 2013) - Manual (Page 14)

Removing the Base Cover | 14
Removing the Base Cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Procedure
1 Close the display and turn the computer over.
2 Remove the screws that secure the base cover to the computer base.
3 Slide the base cover toward the front of the computer.
4 Lift the base cover off.
1 base cover 2 screws (2)
2
1
book.book Page 14 Friday, June 28, 2013 3:27 PM