Dell C2665dnf Color Laser Printer User Manual

Page 374

Advertising
background image

Option

Description

Sent Fax Forward

You can set your printer to forward incoming faxes to another fax

number, or forward them to an e-mail address. When a fax arrives

at your printer, it is stored in the memory. Then, the printer dials

the fax number you have specified in

Forwarding Number

or sends an e-mail to the address you have specified in

Forwarding E-mail Address 1-5

.

To forward to a fax number, you need to register a fax number on
Forwarding Number. To forward to an e-mail address, you

need to register information on

E-Mail Server

and

Forwarding E-mail Address

. For information on e­

mail alert, see "E-Mail Server" and on forwarding number and e­

mail address, see "Fax Settings."
Tap

Off

not to forward incoming faxes.

Tap

Forward

to forward incoming faxes without printing. If an

error occurs during forwarding a received fax, the printer prints the

fax.
Tap

Print and Forward

to forward and print incoming

faxes.
Tap

Print and E-mail

to print and forward incoming faxes

to e-mail.
Tap

Forward to Server

to forward incoming faxes to

server.
Tap

Print and Forward to Server

to print and

forward incoming faxes to server.

2 Sided Print

You can set whether to make duplex print when you print faxes.
Tap

Off

to print faxes on one side of a sheet of paper.

Tap

On

to print faxes on both sides of a sheet of paper.

Remote Receive

You can receive a fax by pressing the remote receive code on the

external telephone after picking up the handset of the telephone.

When you set

Remote receive

to

On

, specify a two digit

remote receive code in

Remote Receive Tone

.

Discard Size

When receiving a document as long as or longer than the paper

installed in your printer, you can set the printer to discard any

excess at the bottom of the page. If the received page is outside

the margin you set, it will print on two sheets of paper at the

actual size. When the document is within the margin and

Discard Size

is set to

Auto Reduction

, the printer

reduces the document to fit it onto the appropriate sized paper

and discard does not occur. If

Discard Size

is set to other

than

Auto Reduction

, the data within the margin will be

discarded.

Transmission

Auto Redial Setup Redial Attempts

You can specify the number of redial attempts to make when the

Defaults

destination fax number is busy, within the range of 0 to 13. If you

enter 0, the printer will not redial.

Interval of Redial Your printer can automatically redial a remote fax machine if it

was busy. Intervals from 1–15 minutes can be entered.

Resend Delay

You can specify the interval between transmission attempts within

the range of 3 to 255 seconds. The default is 8 seconds.

372

Faxing

Advertising