Light-induced fatigue – Dell C2665dnf Color Laser Printer User Manual
Page 543
3
Action
Yes
No
Adjust the transfer bias.
The task is complete.
Contact Dell.
a
On the operator panel, press the
(Information) button and tap
the
Tools
tab → tap
Admin Settings
→ Maintenance→
Adjust Transfer Belt Unit.
b
Tap
K Offset
or
YMC Offset
, and then decrease the value.
c
Launch the Tool Box, and click Chart Print on the Diagnosis tab.
d
Click Ghost Configuration Chart.
The Ghost Configuration Chart is printed.
Does this solve your problem?
Light-induced fatigue
Action
Yes
No
1
Check the light fatigue pattern using the Pitch Configuration Chart.
a
Launch the Tool Box, and click Chart Print on the Diagnosis tab.
b
Click Pitch Configuration Chart.
Go to action 2.
Contact Dell.
The Pitch Configuration Chart is printed.
Does the pattern on the output match with that on the Pitch
Configuration Chart?
2
Replace the drum cartridges. See "Replacing the Drum Cartridges."
The task is complete.
Contact Dell.
Does this solve your problem?
Troubleshooting Guide
541