Dell PowerEdge T110 - Manual (Page 44)

44
Using the System Setup Program and UEFI Boot Manager
Power Management Screen
Failsafe Baud Rate
(115200 default) Displays the failsafe baud rate used for console
redirection. BIOS attempts to determine the baud rate
automatically. This failsafe baud rate is used only if the
attempt fails. This rate should not be adjusted.
Remote Terminal Type
(VT 100/VT220 default) Sets the remote console terminal type, either
VT100/VT220 or ANSI.
Redirection After Boot
(Enabled default) Enables or disables BIOS console redirection when the
operating system is loaded.
Option Description
Power Management
(Active Power
Controller default) Options are OS Control, Active Power Controller,
Custom, or Maximum Performance. For all but the
Custom setting, the BIOS pre-configures the power
settings on this screen as follows:
• OS Control sets the CPU power to OS DBPM, the fan
power to
Minimum Power, and the memory power to
Maximum Performance. In this setting, all processor
performance information is passed from the system
BIOS to the operating system for control. The operating
system sets the processor performance based on
processor utilization.
• Active Power Controller sets the CPU power to System
DBPM, the fan power to Minimum Power, and the
memory power to
Maximum Performance. The BIOS
sets the processor performance based on processor
utilization.
• Maximum Performance sets all fields to Maximum
Performance.
If you select Custom, you can configure each option
independently.
CPU Power and
Performance
Management Options are OS DBPM, System DBPM, Maximum
Performance, or Minimum Power.
Option Description
Mayzie_HOM.book Page 44 Monday, August 31, 2009 9:33 PM