Hard drive, Removing the hard drive – Dell Inspiron Zino HD (410, Mid 2010) User Manual

Page 12

Advertising
background image

Back to Contents Page

 

Hard Drive

Dell™ Inspiron™ 410 Service Manual 

  

Removing the Hard Drive

  

Replacing the Hard Drive

 

 

 

 

 

Removing the Hard Drive

 

1.

Follow the procedures in

Before You Begin

.


 

2.

Remove the top cover (see

Removing the Top Cover

).


 

3.

Remove the top bracket (see

Removing the Top Bracket

).


 

4.

Remove the optical drive (see

Removing the Optical Drive

).


 

5.

Remove the drive bay (see

Removing the Drive Bay

).

 

 

6.

Remove the four screws that secure the hard drive to the drive bay.

 

7.

Lift the drive bay off the hard drive.

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

WARNING:

If you remove the hard drive from the computer when the drive is hot, do not touch the metal housing of the hard drive.

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 

is not covered by your warranty.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

CAUTION:

To prevent data loss, turn off your computer (see

Turning Off Your Computer

) before removing the hard drive. Do not remove the hard

drive while the computer is On or in Sleep state.

CAUTION:

Hard drives are extremely fragile. Exercise care when handling the hard drive.

NOTE:

Dell does not guarantee compatibility or provide support for hard drives from sources other than Dell.

NOTE:

If you are installing a hard drive from a source other than Dell, you need to install an operating system, drivers, and utilities on the new hard

drive.

CAUTION:

When the hard drive is not in the computer, store it in protective antistatic packaging (see "Protecting Against Electrostatic Discharge"

in the safety instructions that shipped with your computer).

1

hard drive

2

screws (4)

3

drive bay

Advertising