Dell Inspiron Zino HD (410, Mid 2010) User Manual
Page 19
3.
Replace the screw that secures the I/O bracket to the chassis.
4.
Using a hex nut driver, replace the two hex nut screws that secure the VGA connector to the I/O bracket.
5.
Replace the three screws that secure the chassis fan to the I/O bracket.
6.
Replace the I/O bezel (see
Replacing the I/O Bezel
).
7.
Replace the bottom cover (see
Replacing the Bottom Cover
).
8.
Replace the top bracket (see
Replacing the Top Bracket
).
9.
Replace the top cover (see
Replacing the Top Cover
).
10.
Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.