Compex Systems 802.11N - Manual (Page 20)

Connect the RJ45 Ethernet cable attached to the PoE Injector to a network device, such as to a
switch or to the PC you will use to configure the access point.
PoE power input: Passive PoE (range 12V – 24V DC)
Connect the power adapter in the PoE kit to the main electrical supply and the power plug into the
socket of the injector.
Now, turn on your power supply. Notice that the POWER LED has lighted up. This indicates that the
access point is receiving power through the PoE Injector and that connection between the access
point and your network has been established.
Note:
Please use the power adapter in the PoE kit. Using a power adapter with a different voltage rating will
damage this product.