Compatible Systems MicroRouter 900i - Manual (Page 19)

Chapter 4 - CompatiView Software Installation 13
Chapter 4 - CompatiView
Software Installation
All of the routers in Compatible Systems’ internetworking and VPN
families, including all RISC Router and MicroRouter models, can be
managed from a single GUI management platform called CompatiView.
CompatiView for Windows is included on the CD-ROM which was
shipped with your MicroRouter 900i.
v Note: An older version of CompatiView for Mac OS was included on
the CD-ROM shipped with your router, but does not contain some of the
features of the newest Windows version.
CompatiView for Windows
CompatiView for Windows allows you to manage the MicroRouter 900i
from an IBM-compatible PC running Windows 95/98 or Windows NT.
The PC can either be configured as an IPX client on a Novell NetWare
internet, or as an IP WinSock client on an IP internet.
System Requirements
In order to successfully run CompatiView for Windows, you need:
• IBM PC or compatible w/486 or later processor
• Microsoft Windows 95/98, or Windows NT installed
• VGA or better monitor
• IP - A WinSock-compatible transport stack
- and/or -
• IPX - A Netware or Microsoft Client installation
v Note: To choose the active transport protocol on a Windows machine
which has both IPX and IP installed, select “Options” from the Admin-
istration menu and click the appropriate radio button under “Default
Transport.”
Installing and Running CompatiView for Windows
The Windows version of the CompatiView program can be found in the
Network Management/CompatiView/Windows directory on the
CD-ROM that was included with your MicroRouter 900i.
Run the auto-installation program (CV5x file) by double-clicking on it.
The installation program will ask you to select (or create) a directory in